Lusterseal : Imprinted Concrete Sealer

From: £44.00

Enhance the Beauty and Durability of Your Imprinted Concrete Surfaces with Our Lusterseal

To Place An Order Please Call 01902 310355

SKU: N/A Categories: ,

Introducing our Imprinted Concrete Sealer – the ultimate solution to protect and elevate the stunning patterns and colours of your imprinted concrete projects. Crafted with precision and care, this high-quality sealer is designed to seal the deal on both protection and aesthetics.

Key Features:

  • Long-Lasting Protection: Our sealer forms a robust shield against the elements, water, oil, and more, ensuring your imprinted concrete retains its luster for years to come.
  • Enhanced Colour Vibrancy: Say goodbye to dull and faded surfaces. Our sealer deepens the richness of the colours and patterns, making them pop with vibrancy.
  • Reduced Maintenance: With our sealer’s easy-to-clean surface, maintenance becomes a breeze, saving you time and effort..
  • Versatile Application: Perfect outdoor projects, our sealer is suitable for driveways, patios, walkways, and more.
  • Available in a Gloss or Matt finish.

Give your imprinted concrete surfaces the protection they deserve while enhancing their visual appeal.

DIRECTIONS FOR USE:

PREPARATION: The surface should be clean, and free from all dirt, oil, and grease. Ensure the surface is thoroughly dry and no rain forecast.
Apply above 10oc with a surface temperature no higher than 24 degrees.

APPLICATION: Stir thoroughly on opening. We recommend a soft brush, roller, or sprayer to be used to apply contents.
Generally, one coat should be sufficient, however if a second coat is required, this can be applied after the first coat has dried
(approx. 1 hour during summer). In cooler weather longer periods may be required. New Block Paving should be laid for 2-3
months before sealing.

COVERAGE: On new, unsealed surfaces average application rate is 3.5m2 per litre. On previously sealed surfaces a greater
coverage rate may be achieved dependant on the porosity of the surface. Keep vehicles off for at least 24 hours. For additional
information visit: www.creteprint.com

HEALTH & SAFETY: Freshly sealed surfaces can be slippery when first applied. We strongly recommend the use of our
Crete-Grip additive to minimise slipping. Flammable liquid and vapour, keep away from naked flame. Harmful by inhalation and
in contact with the skin, irritating to skin, avoid contact with eyes, keep out of reach of children, keep the container tightly closed.

DATASHEET

Lusterseal MSDS

My cart
Your cart is empty.

Looks like you haven't made a choice yet.