EDDIE PERKINS – COBBLECRETE

This large 240sqm driveway was resurfaced using imprinted concrete in 2023 and Concrete Patterning Supplies products were used throughout this project.

The previous driveway was taken up and then followed three days of preparation, and three pours of concrete. Once the concrete was laid, it was smoothed and prepared using tools including our large Roller Tamper and Big Blue Steel Fresno.

The customer had chosen to have an Old English pattern for the driveway with a Brick Border around the edge. We supplied mats for both finishes.

Creteprint Slate Blue Colour Surface Hardener and Slate Blue Powder Release Agent were used to achieve the desired colour.

The surface was then left for a month to dry out due to being laid in the winter months. It was then finished with two coats of Lusterseal Gloss to protect and seal it, with CreteGrip mixed in.

With resealing to maintain this driveway every 12-24 months, this surface will be long-lasting and remain looking fresh for many years to come.

There are many reasons to choose Imprinted Concrete for surfaces:

• Looks beautiful and has many design options
• Easy to maintain with resealing
• Quick installation
• Cost-effective
• Hard-wearing and durable
• Can have CreteGrip added into the seal for more grip
• Minimal weeds
• Sealing protects it against harsh weather conditions

Whether you are a tradesperson or homeowner, if you have any queries about Imprinted Concrete or our products, please don’t hesitate to contact us.